Self installation and problem-solving of mesh belt conveyor

Self installation and problem-solving of mesh belt conveyor

Due to self installation and non-compliance with regulations, various problems may arise during operation due to installation errors. When encountering abnormal operation of the mesh belt conveyor, solutions need to be taken to ensure its normal operation. If the mesh belt conveyor is not corrected further, the machine will be damaged to a greater extent, and the cost of maintenance and repair will be higher. Therefore, timely correction of problems is beneficial for the operation of the machine.

Handling: (1) Prevent small iron blocks from entering; (2) Maintain a certain gap between the cutter and the casing; (3) Balanced feeding; (4) Send all the materials before stopping the machine.

Handling: (1) Clean foreign objects and test run until normal. (2) Adjust the position of the suspension bearing.

Handling: (1) Stop the machine to remove debris inside; (2) Strengthen the drying of raw materials; (3) Stop the machine and repair the transmission device.